Circe | Tuesday, January 19, 2010

The primer wasn't ready to sand during the morning, unfortunately, so while I waited for it to continue to cure I worked on unrelated things.  The delay was not a problem since I'd actually applied the primer a day ahead of schedule, so I was still on track for hull paint on Thursday.

During the afternoon, the primer had cured sufficiently to allow me to sand it as needed with 320 grit paper.  After sanding, I vacuumed the hull and shop, preliminarily solvent-washed the hull, and rinsed down the floor and staging.  I still had more preparations to make before beginning the hull paint, which I'd complete on the 'morrow.

    
         



Total Time Billed on This Job Today:  3.5 hours

<Previous | Next>