Circe | Saturday, August 29, 2009

After a day away from the shop, I decided to spend a few hours finishing up the hull prep.  I sanded the entire hull with 80 and 120 grit paper using a vibrating sander, the final sanding steps required before high-build primer.  I also sanded the small filled areas from the other day, completing that task.

With
that done, I cleaned the hull to remove the worst of the black dust, and raised the staging back to deck-working height in anticipation of the soon-to-begin cockpit work and other final deck preparations.

    

    


Total Time Billed on This Job Today:   2.5 hours

<Previous | Next>